rss-bridge 2026-02-24T07:53:08+00:00

Scientists create ultra-low loss optical device that traps light on a chip

CU Boulder researchers have designed microscopic “racetracks” that trap and amplify light with exceptional efficiency. By using smooth curves inspired by highway engineering, they reduced energy loss and kept light circulating longer inside the device. Fabricated with sub-nanometer precision, the resonators rank among the top performers made from chalcogenide glass. The technology could lead to compact sensors, microlasers, and advanced quantum systems.

---

Science News

from research organizations

---

Scientists create ultra-low loss optical device that traps light on a chip

Date:
February 24, 2026
Source:
University of Colorado at Boulder
Summary:
CU Boulder researchers have designed microscopic “racetracks” that trap and amplify light with exceptional efficiency. By using smooth curves inspired by highway engineering, they reduced energy loss and kept light circulating longer inside the device. Fabricated with sub-nanometer precision, the resonators rank among the top performers made from chalcogenide glass. The technology could lead to compact sensors, microlasers, and advanced quantum systems.
Share:

FULL STORY

---

[Image: Tiny Chip Traps Light With Precision]

Scientists have engineered tiny light-trapping racetracks that could supercharge future sensors and quantum technologies. Credit: AI/ScienceDaily.com

Researchers at CU Boulder have developed highly efficient optical microresonators that could support a new generation of powerful sensor technologies.

A microresonator is a microscopic structure designed to confine light in a small space. As light circulates inside, its intensity increases. When that intensity reaches a sufficient level, scientists can carry out specialized optical processes that enable sensing and other advanced functions.

"Our work is about using less optical power with these resonators for future uses," said Bright Lu, a fourth year doctoral student in electrical and computer engineering and a lead author on the study. "One day these microresonators can be adapted for a wide range of sensors from navigation to identifying chemicals."

The research was published in Applied Physics Letters.

Racetrack Resonator Design Reduces Light Loss

To achieve stronger performance, the team focused on "racetrack" resonators, which are named for their elongated loop shape that resembles a running track.

They incorporated "Euler curves" -- a type of smooth curve also found in road and railway design. Just as vehicles cannot navigate sudden right angle turns at speed, light does not travel efficiently through sharp bends.

"These racetrack curves minimize bending loss," said Won Park, Sheppard Professor of Electrical Engineering and a co advisor on the project. "Our design choice was a key innovation of this project."

By steering light through gradual, carefully engineered curves, the researchers significantly limited the amount of light that escaped. This allowed photons to circulate longer within the resonator and interact more intensely.

Lu explained that excessive light loss prevents the device from reaching the high intensities required for optimal operation.

Precision Nanofabrication at COSINC

The microresonators were fabricated at the Colorado Shared Instrumentation in Nanofabrication and Characterization (COSINC) clean room using a new electron beam lithography system.

Such facilities maintain tightly controlled conditions that are essential for producing reliable devices at extremely small scales. Many optical and photonic components are smaller than the width of a sheet of paper, so even tiny dust particles or minor surface imperfections can interfere with how light travels through them.

"Traditional lithography uses photons and is fundamentally limited by the wavelength of light," Lu said. "However, electron beam lithography has no such constraint. With electrons, we can realize our structures with sub-nanometer resolution, which is critical for our microresonators."

Lu described the fabrication process as one of the most rewarding parts of the project.

"Clean rooms are just cool. You're working with these massive, precise machines, and then you get to see images of structures you made only microns wide. Turning a thin film of glass into a working optical circuit is really satisfying."

Chalcogenide Glass Enables Ultra Low Loss Performance

A major milestone for the team was successfully building the devices using chalcogenides, a family of specialized semiconductor glasses.

"These chalcogenides are excellent materials for photonics because of their high transparency and nonlinearity," Park said. "Our work represents one of the best performing devices using chalcogenides, if not the best."

Chalcogenides allow intense light to pass through with minimal loss, which is essential for high performance microresonators. At the same time, they are challenging materials to process, requiring careful balance during fabrication.

"Chalcogenides are difficult, but rewarding materials to operate for photonic nonlinear devices," said Professor Juilet Gopinath, who has collaborated with Park on this project for more than 10 years. "Our results showed that minimizing the bend loss enables ultra-low loss devices comparable to state-of-the-art in other materials platforms."

Laser Testing and Resonance Measurements

After fabrication, the devices were evaluated under the leadership of James Erikson, a physics PhD student who specializes in laser based measurements. He precisely aligned lasers with microscopic waveguides to send light into and out of the resonators while monitoring its behavior inside.

The team searched for "dips" in the transmitted light signal that indicate resonance, which occurs when photons become trapped and circulate within the structure. By studying the shape of those dips, they were able to determine properties such as absorption and thermal effects.

"The most obvious indicator of device quality is the shape of the resonances and we want them to be deep and narrow, like a needle piercing through the signal background," Erikson said. "We've been chasing this kind of resonator for a long time, and when we saw the sharp resonances on this new device we knew right away that we'd finally cracked the code."

Erikson noted that understanding how much light is absorbed compared to how much is transmitted is critical for device performance. Increasing laser power can introduce heating, which in turn can alter material properties or even damage the device.

"The way most materials interact with light also changes depending on the temperature of the material," said Erikson. "So as a device heats up its properties can change and cause it to work differently."

Toward Microlasers and Quantum Photonics

Looking ahead, these microresonators could be used to create compact microlasers, highly sensitive chemical and biological sensors, and tools for quantum metrology and networking.

"Many photonic components from lasers, modulators and detectors are being developed and microresonators like ours will help tie all of those pieces together," Lu said. "Eventually, the goal is to build something you could hand to a manufacturer and create hundreds of thousands of them."

Explore More

from ScienceDaily

---

Researchers Record Ultrafast Chorus Dance of Electrons on Super-Small Particle

Feb. 18, 2025 It may be the smallest, shortest chorus dance ever recorded. An international team of researchers observed how electrons, excited by ultrafast light pulses, danced in unison around a particle less ...

Movement Sensors Show Promise in Identifying Racehorses at Injury Risk

July 11, 2024 A small 3-ounce sensor capable of recording 2,400 data points of movement in just one second being tested and refined by researchers could be key in reducing the number of injuries to racehorses. ...

Pingpong Balls Score Big as Sound Absorbers

Oct. 10, 2023 Researchers describe an acoustic meta-surface that uses pingpong balls, with small holes punctured in each, as Helmholtz resonators to create inexpensive but effective low-frequency sound insulation. ...

Single-Molecule Valve: Breakthrough in Nanoscale Control

May 3, 2023 A research group has succeeded in regulating the flow of single molecules in solution by opening and closing the nanovalve mounted on the nanofluidic device by applying external pressure. The ...

Nano Particle Trapped Between Mirrors Works as a Quantum Sensor

Apr. 7, 2022 Sensors are a pillar of the Internet of Things, providing the data to control all sorts of objects. Here, precision is essential, and this is where quantum technologies could make a difference. ...

Supersymmetry-Inspired Microlaser Arrays Pave Way for Powering Chip-Sized Optical Systems

May 5, 2021 Ring microlasers are eyed as potential light sources for photonic applications, but they first must be made more powerful. Combining multiple microlasers into an array solves only half of the ...

---

Study of 1.2 Million Infants Reveals the Truth About Vegan Baby Diets

What Happens to Your Brain When You Eat 30% Less for 20 Years?

Aging Isn’t Random, and It Starts Earlier Than You Think

---

[Original source](https://www.sciencedaily.com/releases/2026/02/260224015540.htm)